CFM Terminal Diffusers with 10" Duct Collar & ULPA Filter

Worldwide applications include but are not limited to aerospace, automotive, electronics, plastics, pharmaceuticals and semiconductor manufacturing.

Available in 99.99% and 99.9995% efficiencies, each filter is tested to accepted procedures as described by the Institute of Environment Sciences (IEST) and/or ISO standards.

Damper Assembly Adjustment: With the 1/4" Flat head screw driver, remove the well nut from the centerboard, located in the center of the filter.

Using the same 1/4" Flat head screw driver, insert the screw driver blade through the opening in the centerboard to reach the adjustment screw, permanently attached to the damper plate. Turning the screw driver in a clockwise direction to close the damper and counter clockwise to open the damper.

After the damper adjustment has been made, remove the screwdriver from the opening and replace the well nut.

Data & Specifications:

• Anodized extruded aluminum frames.
• Potting material completely encapsulates pleats on all four sides.
• Hood is galvanized steel.
• Available with 10" duct collar.
• Damper is adjustable from roomside.
• A white epoxy powder coated steel grille protects filter media from damage.
• Centerboard with access port for disc adjustment.
• Seismic holes or tabs provided for compliance with UBC requirements and standards.
• All Materials used shall be fire retardant and self extinguishing in accordance with Underwriter Laboratories UL 586 and UL900 Classifications.