CleanPro® T-Grid Ceiling System

The CleanPro® Cleanroom T-Grid System is designed to carry the load of standard filter modules for Class 10 to Class 10,000 cleanroom environments. It is a 2" (50mm) wide gasket-seal ceiling grid system comprised of 2" (50mm) wide extruded aluminum tee members that are bolted together to form a continuous gasketed ledge to receive HEPA or ULPA filters for ultra-clean manufacturing environments.

Each CleanPro® grid member comes factory pre-cut. The system is suspended with 3/8-16-threaded rod with turnbuckles. The main connectors are designed for 4-way intersections. The zinc die cast component is cut for other connectors when used for splice, three-way, inside corners, and outside-edge-perimeter connections.

The clip is top mounted to the system, which interconnects to the top threaded boss with 1/4-20 hardware. The zinc die cast connector has been specially designed to engage with the top upper area of the main runners and cross tee sections for accurate grid alignment. All intersections are designed for straight cuts to facilitate ease of construction on the job site.