Mini 2 Zero Volt Benchtop Ionizing Blower, 24V
The EMIT 50642 Mini Zero Volt Ionizer (ZVI) 2.0 is a compact bench top ionizer used for neutralizing electrostatic charges on insulators and ungrounded conductors in a 6.0" x 24" coverage area. Its compact size (5.3" high x 3.5" wide x 1.7" deep with stand) allows it to be used in confined spaces such as environmental chambers and automated equipment. It may also be used at standard ESD workstations. Its fast discharge times (< 0.3 seconds at 12") and ±5.0 Volt offset voltage exceed the required limits of ANSI/ESD S20.20 and ESD TR53. Steady-State DC emitters are spaced farther apart to prevent ion recombination, increase decay efficiency and provide a broader coverage area of ionization. The Mini ZVI 2's two-speed fan (33 CFM to 51 CFM) produces consistent performance at both the low and high speeds. Low airflow may be used when working with small parts and components that may move with higher airflow. The Mini ZVI 2.0 features a stainless steel enclosure and multi-mount stand to minimize contamination and corrosion when used in clean or sensitive areas.
The EMIT Mini Zero Volt Ionizer 2.0 operates on Steady-State DC. Steady-State DC systems consist of separate negative and positive ion emitters connected by a pair of high-voltage cables to their respective high-voltage power supplies. DC power is constantly applied to the emitter points. The ionizer utilizes feedback from the internal sensor grill to continuously adjust the output to maintain balance.
Packaging Includes
- Mini Zero Volt Ionizer 2.0
- Power Adapter, 24VDC, with interchangeable plugs (North America, UK/Asia, Europe)
- Ground Cord
- Emitter Pin Cleaner Pack
- Certificate of Calibration
- Improved Fast Discharge Times (<3.0 seconds at 12")
- Neutralizes both positive and negative electrostatic charges within the coverage area.
- MORE AIRFLOW High/Low Speed Fan (33 to 51 CFM)
- Consistent performance at all speeds. Low airflow may be used when working with small moving parts and components that may move with higher airflow.
- Compact Ionizer with Stand/Mounting Bracket (24 VDC Input)
- Neutralizes electrostatic charges on insulators and ungrounded conductors in a 6.0" x 24" coverage area.
- Compact Size (5.3" High x 3.5" Wide x 1.7" Deep with Stand)
- Use in confined spaces such as environmental chambers and around automated equipment or at standard ESD workstations.
- ±5 Volt Offset Voltage Balance
- Outperforms required limits of ANSI/ESD S20.20 < ± 50 volts tested per ESD TR53.
- Steady State DC Emitters
- Spaced farther apart to prevent ion recombination, increase decay efficiency, and provide a broader coverage area of ionization.
- Solid Tungsten Emitters
- Maintains sharp point for optimal ionizer performance. Resists oxidation, melting and other damage that dulls the tip of the emitter
- Shielded Bearings
- Retains lubricant and minimizes contamination in the work area.
- Stainless Steel Housing and Multi-Mount Stand
- Minimizes foreign objects debris, corrosion, and other contaminations when used in clean or sensitive areas.
- NIST Calibrated with Certificate
- Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology
Calibration
- 100-240V Power Adapter with Interchangeable Plugs
- Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
- Made in the United States of America
Specifications
- Air Flow: Two speed fan (33 CFM, 51 CFM)
- Balance (offset voltage) at 12": in front of Ionizer: ±5 Volts Typical ±25 Volts Maximum (Temperature Range: 65° F to 80° F, RH: 15% to 65%)
- Chassis: Stainless steel housing and stand
- Dimensions (with stand): 5.3" x 3.5" x 1.7" (14 cm x 9.0 cm x 4 .0cm)
- Emitter Points: 0.050" base diameter Made of pure tungsten
- High Voltage Power Supply: 5.5kV DC nominal
- Input Power: 24 VDC, center positive, 2.5 x 5.5 mm power jack
- Ion Emission: Steady-state DC with sense feedback
- Mounting: Bench top tilt adjust frame
- Ozone :< 0.05 ppm
- Weight: 1.1 lbs. (0.5 kg)
| SKU | I398710 |
|---|---|
| Mfg. Part Number | 50642 |
| Brand | Desco |
| Input | 24V |
CleanPro® Cleanroom Products is ISO 9001:2015 Certified.