Zero Volt Powder Coated Benchtop Ionizing Blower, 120V

• Single Fan Steady-State DC Ionizer for 16" x 24" Coverage Area
• Neutralizes electrostatic charges on insulators and ungrounded conductors within the coverage area
• Less than 2.0 Seconds Discharge Time with ±3.0 Volts Balance (Offset Voltage) at 12"
• Meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53
• Sealed Plenum Air Flow
• Prevents contamination from being introduced to the workstation
• Auto-Feedback System (Audible and Visual Alarm)
• Powers down automatically and alarms should the supply voltage drop
• Selectable Input Voltage
• Configures to 120V or 220V input voltage via internal jumpers
• Low, Medium and High Fan Speeds (50-100 CFM)
• Maintains optimum performance at all speeds and allows for use with airflow sensitive applications
• Powder Coated Enclosure
• Minimizes debris and corrosion for use in clean or sensitive areas
• Nort

Specifications

The comparative efficiency of Benchtop ionizers is determined by a standard test published by the ESD Association: ANSI/ESD STM 3.1. Typical positive and negative decay times (1000V - 100V) measured using this standard are shown in Figures 6 and 7. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.

• Input Voltage and Frequency: Internally selectable for 100-120V, 50/60 Hz
• Power Consumption: 12 W
• Dimensions (including stand): 9.5" H x 6.0" W x 3.1" D (241 mm x 152 mm x 79 mm)
• Weight: 4.5 lbs. (2.0 kg)
• Balance (Offset Voltage) at 12": ±3.0 V typical ±25 V maximum
• Neutralization (Discharge) Time at 12": < 2.0 seconds
• Airflow: Three-speed fan 50-100 CFM
• Emitter Points: 0.050" diameter tungsten
• Ion Emission: Steady-state DC with sense feedback
• Fuse: 250 mA slow blow
• High Voltage: Power Supply 5.5 kVDC nominal
• Ozone: <0.05 ppm
• Enclosure Powder: coated aluminum
• Certifications: CE Country of Origin United States of America