High Output Benchtop Ionizing Blower, 120V
- Bench Top Steady State DC Ionizer: Specially designed fan modules create better coverage (16” x 24”), consistent offset voltage (balance) ±3 volts, and superior discharge times(<1 second at 12”) tested per ANSI/ESD STM 3.1
- Sealed Plenum Air Flow: Prevents contamination from being introduced to workstation.
- Active Balancing System with Audible and Visual Alarm: Continually adjusts voltage output for optimal performance and automatically alarms when maintenance is needed or unit is not operating correctly
- 120/220 VAC Input Voltage Selectable: Unit can we used with 110V or 220V power sources
- 3 Position Fan Speed: Low, Medium, High (50-100 CFM): Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures.
- Powder Coated Housing and Multi-Mount Stand with Sealed Bearing Fans: Minimizes foreign objects debris, corrosion, and other contaminations when used in clean or sensitive areas.
- Replaceable Emitter Pins: Field replaceable emitter pins allow for minimal downtime
- Compatible Ionizer Motion Sensor 60509: Activates an ionizer when an operator is present and deactivates when the workstation is vacant to conserve energy and reduce ionizer maintenance
- NIST Calibrated: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- Made in the United States of America
Packaging Includes
- High Output Benchtop Ionizer
- Power Cord, North America
- Emitter Point Cleaner Pack
- Certificate of Calibration
The Desco High Output Benchtop Ionizer is a compact and lightweight steady state DC auto-balancing benchtop worksurface ionizer with integrated closed-loop feedback. The unit is normally placed at one end of the workbench or area to be neutralized. It may also be mounted to a wall or shelf. The Ionizer's neutralization discharge time will be best approximately 12" to 48" directly in front of the unit and will increase as the distance from the unit increases.
The Desco High Output Benchtop Ionizer employs Steady State DC technology. Steady State DC systems consist of separate negative and positive ion emitters connected by a pair of high-voltage cables to their respective high-voltage power supplies. The spacing between emitters varies depending on the design, and DC power is constantly applied to the emitter points. The ionizer uses feedback from the internal sensor grill to continuously adjust the output to maintain balance.
Specification
The comparative efficiency of benchtop ionizers is determined by a standard test published by the ESD Association: ANSI/ESD STM 3.1. Typical positive and negative discharge times (1000V - 100V) measured using this standard are shown in Figures 5 and 6. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.
- Input Voltage and Frequency: Internally selectable for 100-120V, 50/60 Hz
- Power Consumption: 12W
- Dimensions (including stand) 9.5" H x 6.0" W x 3.1" D (241 mm x 152 mm x 79 mm)
- Weight: 4.5 lbs. (2.0 kg) Balance (Offset Voltage) at 12" ±3 V typical ±25 V maximum
- Neutralization (Discharge) Time at 12" < 2.0 seconds
- Airflow Three-speed fan 50-100 CFM
- Emitter Points: 0.050" diameter tungsten
- Ion Emission Steady-state DC with sense feedback
- Fuse: 250 mA slow blow
- High Voltage Power Supply: 5.5 kVDC nominal
- Ozone <0.05 ppm
- Enclosure: Powder coated aluminum
| SKU | I206207 |
|---|---|
| Mfg. Part Number | 60505 |
| Brand | Desco |
| ESD-Safe | Yes |
| Input | 120V |
CleanPro® Cleanroom Products is ISO 9001:2015 Certified.