Tech Wear

IVX-400 Waist-Length ESD Jacket with 3 Pockets

In Stock

IVX-400 fabric meets the requirements of the National ESD Association's ANSI/ESD STM 2.1-2013, Category 3, "Garment used as primary grounding path for personnel" and/or "Grounded through a single wire constant monitor system", and will maintain these performance characteristics for a minimum of 100 washes or 2 years, whichever comes first.

As low as $54.29

Technical Documents

More Information
PAC Item Code C100219
Brand Tech Wear
ESD Properties 10⁵ - 10⁷ Resistance
Type Launderable
Material 93% Polyester/7% Carbon Fiber
Closure Snap
Shape Lapel Collar
Style Set-In Sleeves
Length Waist Length
Color Blue

Features

  • Royal Blue Jacket with Lapel Collar.
  • Meets normal FR requirements for polyester fabrics.
  • Fabric will not crock or bleed off onto other surfaces.
  • Fabric content 93% texturized polyester and 7% Shakespeare
  • Conductive Fibers, LLC Resistat®fiber (carbon-suffused monofilament nylon), knit in grid pattern.
  • Carbon suffused monofilament nylon is Shakespeare Resistat® fiber is conductive at 104 and is non-flaking and non-sloughing.
  • Surface resistivity of fabric is 105 ohms per square with only slight deterioration noticed after 50 launderings. (To maximum of 107).
  • Static decay rate per 101°C method 5000 volts to 500 in less than 0.1 second.
  • Fabric is light-weight, 70 denier with a unique construction which does not allow easy penetration of dust particles.
  • Finish is disperse-dyed heat set. Contains no softeners, hand builders, etc.

Size Chart

Size XS S M L XL 2XL 3XL 4XL 5XL
Fits Chest 30-32 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
Finished Chest 41 43 47 50 54 57 60 64 66
Finished Sleeve 30 31 32 34 35 36 39 40 40
Jacket Length 30 32 32 32 32 33 33 33 34

Note:

  • All measurements are rounded to the nearest inch.
  • Length measurements are measured from center back of neck to finished hem.
  • Finished sleeve is measured from center back of neck to bottom of cuff.

Laundering Instructions

Cool or warm water wash with any commercially-available liquid detergent, tumble dry low heat or hang dry. DO NOT USE BLEACH OR FABRIC SOFTENERS. The carbon-suffused mono-filament nylon is sensitive to heat and should not be exposed to drying heat in excess of 120°F. Wash at 90°F (Maximum), and tumble dry at low heat or hang dry. This medium weight fabric will dry very quickly, and we recommend hang-drying for maximum life.

You May Also Be Interested In
©Production Automation Corporation. All Rights Reserved.