Torrey Pines Scientific
ST1
Analog Stirrer with Aluminum Top, 6" x 6"
Stir solutions from 100 to 1500 rpm with a strong motor/magnet assembly on a flat, white solid ceramic or aluminum sheet metal surface. Each Torrey Pines Scientific® stirrer is made with a cast aluminum chassis that is painted with chemically resistant epoxy paint. The chassis is designed to keep spills out of the case. Stirrer controls are solid state and have an OFF detent fully counter-clockwise and a full 270 degrees of control clockwise from the off position.
Special Price
$395.25
Regular Price
$425.00
Features
- Stir from 100–1500 rpm on each stirring position with an individual control
- Stir 2 liters of water
- Plate size is 6” (15.24 cm) x 6” (15.24 cm)
- Solid ceramic surface for excellent chemical resistance
- Fused for safety
- Rugged cast aluminum chassis
- 12-month warranty
- UL, CSA, and CE certified
Applications
- Stir solutions for pH measurements
- Titrations
- Mixing soluble solids or powders for analysis
- Dissolve solids in solutions
- Mixing polishing compounds
- The coated stir bars coupled with strong magnets under the plate surface are used for mixing aggressive solutions that would attack a stainless steel overhead mixer paddles
- Mix most any solution in the lab without an overhead stirrer
Specifications
Stirrer
- Speed range unloaded: 100–1500 rpm
- Maximum load, aqueous: 2 L (ST1)
- Magnet strength: 20 lbs
- Weight capacity on heater surface: Over 50 lbs (22.5 kg)
Electrical
- Operating voltages available: 220 VAC/60 Hz
- Power consumption: 100 watts
Unit Dimensions
- ST1: 10” (25.4cm) deep, 7” (17.78 cm) wide and 4.5”(11.43 cm) tall
| SKU | I174080 |
|---|---|
| Mfg. Part Number | ST1 |
| Brand | Torrey Pines Scientific |
| Surface | Aluminum |
| Adjustment | Analog |
| Input | 115V |
| Type | Magnetic Stirrer |
You May Also Be Interested In
CleanPro® Cleanroom Products is ISO 9001:2015 Certified.